Countersunk Neodymium Shallow Pot Magnet D32mm (1.26 in)

Pot magnet with countersunk borehole ø = 32mm (1.26 in), height 6.8 mm/ 8mm  Borehole 5.5/10.6 mm Angle 90° Magnet made of neodymium  Steel cup made of Q235 Strength approx. 30 kgs~35kgs Low MOQ, customized is welcomed according to your requirements. Neodymium Countersunk Pot Magnets are also known as Countersunk Pot Magnets, Countersunk Holder Magnets, and Countersunk Cup Magnets, and they are made of a steel casing and a rare earth magnet. They have a countersunk hole in the center of the magnet that a blot can easily screw through. To complete the fixing or installation, countersunk pot magnets are ideal for mechanical manufacturing and construction.
send email to us

Products Details

Neodymium pot magnets are thought to be the ultimate solution for clamping, gripping, and attaching components. Sintered Neodymium magnets will be enclosed in a steel shell, concentrating the magnetic circuit and producing a strong attractive force. The countersunk hole on these Neodymium Shallow Pot Magnets allows for screw fixings. They are ideal for applications such as cabinet doors, drawers, gate latches, and door holdings where magnets are used to close mechanisms and the screw head must be concealed.Most of our round magnetic assemblies are made with ceramic or neodymium magnets, which are brittle and can break if dropped or riveted. Please exercise caution when handling channel magnet assemblies because their exceptional magnetic force may cause them to attract to metal (or to each other) so strongly that putting fingers in their path may result in pain.

With Countersunk Hole

With Swivel Hook

With External Thread

Magnetic Pushpins

Precast Magnets

Without Hole

With Bore Hole

With Carabiner

With Screwed Bush

With Internal Metric Thread

Our pot magnet assemblies are created by combining ceramic or neodymium magnets with steel cups. The magnets are magnetized together with the casings to create a holding force that is far greater than that of a single magnet. Hooks, knobs, PEMs, and other fasteners can be easily attached to meet your specific holding needs. Unless otherwise specified, we coat all of our round base cup magnets with nickel or chrome, and we can also provide custom coatings to meet your environmental requirements. 1. The structure of the Countersunk Pot Magnet is properly designed to maximize magnetic force. 2. Countersunk Pot Magnet can be made of NdFeB, SmCo, ALNICO, Ferrite, and other materials. 3. Coating options include Zn, Ni, Cr, painting, rubber covers, and so on. 4. For any other special requests, custom made is available. 5.Delivery time: 7-30 days (According to Quantity) 6.MOQ: 1000pcs 7.Packing: Standard packing for air or sea shipment as needed. 8.Process: Half-finished Sintered Neodymiun magnet: raw material block > > Grinding > Cutting >latching >Coating > Inspection> Assembly >PackingThey're also great for shop fitting, where magnets are used to attach shelving, signage, lighting systems, and window displays. Neodymium is the ideal material for these applications because it has a high magnetic strength-to-size ratio, allowing for the use of small magnets in applications where space is limited. Depending on the magnet size, the countersunk hole in the magnet can accommodate screw heads ranging from M3 to M5. The countersunk magnet range is available in a variety of sizes, as shown below.
Antenna Mounts Tow Light Kits Work Lamp Bases Emergency Light Holders Vehicles Flag Holders Sign and Banner Holders

Previous:Brushless DC Motor bonded Injection Magnetic Rotor

Next:Neodymium Rubber Coated Gun magnet

magnetic ball marker, Holding Magnets, Magnet Sheets, N52 Countersunk Magnet, sintered permanent magnets, China Magnalock and Interlock, Arc Neodymium Magnets, Segment Magnet, Magnetic Coupling, magnetic arc reactor,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours